Front And Side Panel Controls And Connections - Toshiba 26HLC56 Owner's Manual

Front and side panel controls and connections

Control panel
6
1 Red LED — Red light indicates power is on.
2 Remote sensor — Point the remote control toward the
remote sensor. See "Remote control effective range"
(- page 16).
3 POWER — Press to turn the monitor on and off.
VOLUME C c — When no menu is on-screen, these
4
buttons adjust the volume level. When a menu is on-
screen, these buttons function as left/right menu
navigation buttons.
5 MENU — Press to access the menu system
(- page 23).
6 INPUT (ENTER) — Repeatedly press to change the
source you are viewing (VIDEO-1/ColorStream HD-1,
VIDEO-2, ColorStream HD-2, HDMI, or PC.
When a menu is on-screen, the INPUT button on the
monitor control panel functions as the Enter button.
8
Chapter 1: Introduction
Monitor front
7
5 4
Monitor Side panel
3 2 1
ARROWS BbC c — When a menu is on-screen, these
7
buttons function as up/down/left/right menu navigation
buttons.
8 VIDEO-2 IN — Standard (composite) video and standard
(analog) audio inputs plus optional S-video input for
connecting devices with either composite video or
S-video output.
Note:
• Standard (composite) video and S-video cables carry
only video information; separate audio cables are
required for a complete connection.
• Do not connect both a composite video and an S-video
cable to VIDEO-2 simultaneously or the picture
performance will be unacceptable.
8