Connecting Two Vcrs; Connecting A Camcorder - Toshiba 26HLC56 Owner's Manual

Connecting two VCRs

This connection allows you to record (dub/edit) from one VCR
("VCR1" in the illustration below) to a second VCR ("VCR2")
while watching a videotape.
You will need:
coaxial cable
•
standard A/V cables
•
Note: Do not connect the same VCR to the output and input
jacks on the monitor at the same time. To dub or edit, VCR 2
must select LINE IN, and the monitor must select Video 1.
From antenna
Stereo VCR 1 (plays)
VIDEO AUDIO
L
IN from ANT
CH 3
CH 4
OUT to TV
L
Monitor's upper
back panel
Stereo VCR 2 (records)
VIDEO
L
IN from ANT
CH 3
CH 4
OUT to TV
L
The unauthorized recording, use, distribution, or revision of
television programs, videotapes, DVDs, and other materials is
prohibited under the Copyright Law and may subject you to
civil and criminal liability.
Chapter 2: Connecting your Monitor
R
IN
OUT
R
AUDIO
R
IN
OUT
R

Connecting a camcorder

You will need:
standard A/V cables
•
– For better picture performance, if your camcorder has
S-video, connect an S-video cable (plus the audio cables)
to VIDEO-2 on the monitor's side panel.
Camcorder
VIDEO AUDIO
OUT
L
R
To view the camcorder video:
Select the Video 2 video input source on the monitor.*
*To select the video input source, press + on the remote control
(- page 25). To program the monitor's remote control to operate
other devices, see "Using the remote control to operate your other
devices" on page 18.
VIDEO-2 inputs on
monitor's right side panel
13