Connecting A Vcr; Connecting A Vcr And Cable Box - Toshiba 26HLC56 Owner's Manual

Connecting a VCR

You will need:
coaxial cable
•
standard A/V cables
•
– For better picture performance, if your VCR has S-video,
connect an S-video cable and standard (analog) audio
cables to the VIDEO-2 inputs on the side panel (instead of
the VIDEO-1 inputs). Do not connect both types of video
cable to VIDEO-2 at the same time or the picture
performance will be unacceptable.
– If you have a mono VCR, connect L/MONO on the monitor
to your VCR's audio out terminal using the white audio
cable only.
From Cable TV or antenna
Stereo VCR
VIDEO AUDIO
L R
IN from ANT IN
CH 3
CH 4
OUT
OUT to TV
L R
Monitor's upper back panel
To view the VCR:
Turn ON the VCR. Select the Video 1 video input source on
the monitor.*
*To select the video input source, press + on the remote control
(- page 25). To program the monitor's remote control to operate
other devices, see "Using the remote control to operate your other
devices" on page 18.
The unauthorized recording, use, distribution, or revision of
television programs, videotapes, DVDs, and other materials is
prohibited under the Copyright Law and may subject you to
civil and criminal liability.
Chapter 2: Connecting your Monitor

Connecting a VCR and Cable box

You will need:
coaxial cables
•
standard A/V cables
•
– For better picture performance, if your VCR has S-video,
connect an S-video cable and standard (analog) audio
cables to the VIDEO-2 inputs on the side panel (instead of
the VIDEO-1 inputs). Do not connect both types of video
cable to VIDEO-2 at the same time or the picture
performance will be unacceptable.
– If you have a mono VCR, connect L/MONO on the monitor
to your VCR's audio out terminal using the white audio
cable only.
– When you use a Cable box, you may not be able to use
the remote control to program or access certain features
on the monitor.
Cable box
OUT
To view basic and premium Cable channels:
Turn ON the VCR. Select the Video 1 video input source on
the monitor.* Tune the VCR to channel 3 or 4 (whichever
channel the cable box output is set to). Use the cable box
controls to change channels.
*To select the video input source, press + on the remote control
(- page 25). To program the monitor's remote control to operate
other devices, see "Using the remote control to operate your other
devices" on page 18.
The unauthorized recording, use, distribution, or revision of
television programs, videotapes, DVDs, and other materials is
prohibited under the Copyright Law and may subject you to
civil and criminal liability.
From Cable TV
IN
CH 3
CH 4
Stereo VCR
VIDEO AUDIO
L R
IN from ANT IN
CH 3
CH 4
OUT
OUT to TV
L R
Monitor's upper back panel
11