Selecting The Cinema Mode (480I Signals Only); Adjusting The Picture; Selecting The Picture Mode - Toshiba 26HLC56 Owner's Manual

3
Press C or c to select the desired gray level (1, 2 or 3), as
follows:
1: Black
2: Dark gray
3: Light gray
Selecting the cinema mode
(480i signals only)
When you view a DVD (480i signal; 3:2 pulldown processed)
from a DVD player connected to the VIDEO-1, VIDEO-2,
ColorStream HD-1/HD-2 (component video), or HDMI
inputs on the monitor, smoother motion can be obtained by
setting the Cinema Mode to Film.
To set the Cinema Mode to Film:
1
Press Y and open the Picture menu.
2
Press B or b to highlight Cinema Mode.
3
Press C or c to select Film.
Mode
Picture Settings
Cinema Mode
MENU Back EXIT
To set the Cinema Mode to Video:
Select Video in step 3 above.
Chapter 6: Using the Monitor's features
Picture
Sports
ENTER
Video
Watch TV

Adjusting the picture

Selecting the picture mode

You can select your desired picture settings from four different
modes, as described below.
Mode Picture Quality
Sports Bright and dynamic picture (factory setting)
Standard Standard picture settings (factory setting)
Lower contrast for darkened room (factory
Movie
setting)
Preference Your personal preferences
To select the picture mode:
Press u on the remote control.
The following popup menu appears on-screen.
Standard
Repeatedly press u or C/c to cycle among the modes.
To select the picture mode using the menu system:
1
Press Y and open the Picture menu.
2
Press B or b to highlight Mode.
Mode
Picture Settings
Cinema Mode
MENU Back EXIT
3
Press C or c to select the mode you prefer.
Note:
• The picture mode you select affects the current input
only. You can select a different picture mode for each
input.
• If you select one of the factory-set picture modes
(Sports, Standard, or Movie) and then change a
picture quality setting (for example, increase the
contrast or change the color temperature), the picture
mode automatically changes to Preference in the
Picture menu.
Picture
Sports
ENTER
Video
Watch TV
29