Using Cableclear ® /Dnr (Digital Noise Reduction); Selecting The Color Temperature - Toshiba 26HLC56 Owner's Manual

®
Using CableClear /DNR (digital noise
reduction)
The CableClear ® digital noise reduction feature allows you to
reduce visible interference in your monitor's picture. This may
be useful when receiving a broadcast with a weak signal
(especially a Cable channel) or playing a noisy video cassette
or disc.
To turn on the CableClear/DNR settings:
1
Press Y and open the Picture menu.
2
Highlight Picture Settings and press T.
3
Press B or b to highlight CableClear DNR.
Picture Settings
Black Strech
MPEG NR
CableClear DNR
Color Temperature
MENU EXIT
Back
4
Press C or c to select Low, Middle, High, or Auto.
CableClear DNR
To turn off CableClear DNR:
Select Off in step 4 above.
Note:
• The CableClear ® DNR feature works with 480i input sources
only.
• When the monitor is in ColorStream, HDMI or PC mode, the
words "CableClear DNR" will change to "DNR" in the menu.
Chapter 6: Using the Monitor's features
2/2
On
High
Auto
Cool
Watch TV
Low

Selecting the color temperature

You can change the quality of the picture by selecting from
three preset color temperatures (Cool, Medium, and Warm), as
described below.
Mode Picture Quality
Cool blueish
Medium neutral
Warm reddish
To select the color temperature:
1
Press Y and open the Picture menu.
2
Highlight Picture Settings and press T.
3
Press B or b to highlight Color Temperature.
Picture Settings
Black Strech
MPEG NR
CableClear DNR
Color Temperature
MENU EXIT
Back
4
Press C or c to select the mode you prefer, as described in
the table above.
Note: If you select one of the factory-set picture modes
(Sports, Standard, or Movie) and then change the color
temperature, the picture mode automatically changes to
Preference in the Picture menu.
2/2
On
High
Auto
Cool
Watch TV
31