Symbols - Bosch Rexroth LU 2 Assembly Instructions Manual

6/54 About this document
Bosch Rexroth AG, MIT: LU 2, 3 842 358 814/2017-01
Safety instructions are set out as follows:
Type and source of danger!
Consequences of non-compliance
Measures to prevent hazards
...
• Warning sign: points out the hazard
• Signal word: identifi es the severity of the hazard
• Type and source of danger: indicates the type and source of the danger
• Consequences: describes what occurs when failing to take precautions
• Precaution: states how the hazard can be avoided
Table 2: Hazard classes according to ANSI Z535.6-2006
Warning sign, signal word
DANGER
WARNING
CAUTION
NOTICE
1.3.2

Symbols

The following symbols indicate notices which are not safety-relevant but make the layout
of the document more clear.
Table 3: Meaning of the symbols
Symbol Meaning
If this information is not observed, the product cannot be used and/or
operated optimally.
Single, non-related actions
1. Numbered instructions:
The numbers indicate that the actions must be carried out one after the
2.
other.
3.
SIGNAL WORD
Meaning
Indicates a hazardous situation which will result in death or
serious injury if not avoided.
Indicates a hazardous situation which can result in death or
serious injury if not avoided.
Indicates a hazardous situation which can result in minor or
moderate injury if not avoided.
Damage to property: The product or the environment
could be damaged.