Personal Protective Equipment; Owner Obligations; General Information Regarding Damage To Property And The Product - Bosch Rexroth LU 2 Assembly Instructions Manual

Automatic lubrication unit
Table of Contents

Advertisement

10/54

General information regarding damage to property and the product

EMERGENCY STOP, fault
During maintenance and
repair
During disposal
During cleaning
Bosch Rexroth AG, MIT: LU 2, 3 842 358 814/2017-01
• After an EMERGENCY STOP or a malfunction, only switch on the system once
the cause of the fault has been determined and the error resolved.
• Make sure that there are no obstacles blocking access to maintenance and
inspection points.
• Perform the prescribed maintenance work at the intervals prescribed in
chapter 10.3 Maintenance.
• Make sure that no lines, connectors, or components are disconnected as long
as the system is under pressure and voltage. Secure the system against being
switched back on.
• Dispose of the product in accordance with the currently applicable national
regulations in your country.

2.7 Personal protective equipment

• Appropriate protective clothing is to be worn when handling the product
(e.g. safety shoes, close-fi tting clothing, a hair net for long, loose hair).
As owner or operator, you are responsible for appropriate protective equipment
when using the product.
All personal protective equipment must be intact.

2.8 Owner obligations

• Before fi rst use or re-commissioning of a conveyor system, run a risk assessment
in accordance with DIN EN ISO 12100.
• Before initial commissioning ensure that there are no protruding or sharp-edged
parts that may endanger personnel working or moving in the area.
• Provide safety-related instructions to the operating personnel before fi rst use or
re-commissioning, and then in regular intervals.
3 General information regarding damage to
property and the product
The warranty only applies to the delivered confi guration.
• The warranty is void in case of faulty installation, commissioning and operation, as
well as improper use and / or improper handling.
• Avoid the penetration of detergent into the system.
• Never use solvents or aggressive detergents.
• Do not use a high-pressure cleaner for cleaning.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents