Table of Contents
Advertisement
Configuring/Programming
8.1
Integrating the HCS4300 into the PROFINET configuration
Procedure with SIMATIC S7
If the hardware catalog of your configuration software does not feature the HCS4300 yet, it
can be integrated by installing an HSP. An HSP is available for TIA Portal and can be
downloaded from the Siemens Service&Support area
(http://www.siemens.com/automation/service&support
Procedure with non-Siemens controllers
For PROFINET configuration you will need the language-specific GSDML file. The GSDML
file must be installed in the configuration software.
The GSDML file "GSDML-V2.34-Siemens-002A-HCS4300-
from the Siemens Service&Support area
(http://www.siemens.com/automation/service&support).
If a non-Siemens PROFINET controller is used, install the GSDML file as described in the
manufacturer's instructions.
8.2
Integrating the HCS4300 into the PROFIBUS configuration
Procedure with SIMATIC S7
If the hardware catalog of your configuration software does not feature the HCS4300 yet, it
can be integrated by installing the GSD file. The file is available in German (SIEM81C5.gsg)
and English (SIEM81C5.gse) and can be downloaded from the Siemens Service&Support
area
Procedure with non-Siemens controllers
You will need the language-specific GSD file for PROFIBUS configuration. The
SIEM81C5.gsx files can be downloaded from the Siemens Service&Support area
(http://www.siemens.com/automation/service&support
If a non-Siemens PROFIBUS controller is used, install the GSD file as described in the
manufacturer's instructions.
SIPLUS HCS4300 PROFINET/PROFIBUS DP
Operating Instructions, 10/2019, A5E35452705A/005
(http://www.siemens.com/automation/service&support
/).
yyyymmdd
" can be downloaded
/).
/).
8
83
Advertisement
Table of Contents
