Bitmap Size And Screen Resolution - Siemens SINUMERIK 840D Programming Manual

1
General
1.6 Cycle support for user cycles (SW 6.2 and higher)
For HMI Embedded, the *.com files can be loaded into
the NCU (read in via "Services" by means of
RS-232-C). But as they occupy NC memory there, it is
better to integrate them in the HMI. They must be
packed and incorporated into the application software of
the HMI version. The tool to pack the files is included
with the standard cycle software under \hmi_emb\tools.
Step sequence for creation
•
Copy file arj.exe from directory \hmi_emb\tools into an
empty directory on a PC.
•
Copy the separate configuration files *.com to this
directory.
•
Pack each individual com file with the command
arj a <name target file> <name source file>.
The target files must have the extension co_.
Example: pack configured file cycproj1.com to:
arj a cycproj1.co_ cycproj1.com.
•
Copy the *.co_ files to the relevant directory of the HMI
application software and create a version.
References:

1.6.4 Bitmap size and screen resolution

With SW 6.2, there are three different screen resolutions
in the HMI. For each of the resolutions, there is a
maximum bitmap size for the cycle screen forms (see the
following table), to be observed when creating your own
bitmaps.
Screen resolution
640 * 480
800 * 600
1024 * 768
Bitmaps are created and stored as 16-color bitmaps.
1-50
/BEM/, Operator's Guide HMI Embedded
/IAM/, HMI/MMC Installation &
Start-Up Guide
IM2 "Installation and Start-Up Guide
HMI Embedded"
Bitmap size
224 * 224 pixels
280 * 280 pixels
352* 352 pixels
SINUMERIK 840D/840Di/810D Programming Guide Cycles (PGZ) – 11.02 Edition
1
12.97
09.01
© Siemens AG, 2002. All rights reserved