3
12.97
11.02
3.16.1 Operation, parameter assignment, input screen form
Description of parameters
Interactive screen form CYCLE800 on standard
interface
_TC (name of swivel data record)
The existing swivel data records (see Start-Up of
CYCLE800) can be selected (toggled).
Each swivel data record has a name. No name needs
to be declared if there is only one swivel data record.
"0" à swivel data record deselected.
_FR (retraction)
• Do not retract
• Traverse axis Z
• Traverse axis Z, XY (only when CYCLE800 is active in the
start-up menu).
The retraction positions can be entered in the start-up menu
display.
The retraction positions are approached absolutely. If a
different retraction sequence or incremental positioning is
desired, the process can be modified accordingly in user cycle
TOOLCARR during start-up.
© Siemens AG, 2002. All rights reserved
SINUMERIK 840D/840Di/810D Programming Guide Cycles (PGZ) – 11.02 Edition
3.16 Swiveling – CYCLE800 (SW 6.2 and higher)
3
Milling Cycles
Reference point
Bezugspunkt
before rotation
vor der Drehung
Drehung
Rotation
Nullpunkt nach
Zero after rotation
der Drehung
3-229