2.4.3
Fitting an SC RJ plug to a plastic FO cable (POF)
Introduction
The next section explains the individual steps when assembling a POF FO cable with SC RJ
plug using the IE termination kit for SC RJ POF plug.
You should also refer to the assembly instructions supplied with the IE termination kit for SC
RJ POF plug.
Procedure
A stripping pliers
B Kevlar scissors
C Microscope
D grinding and polishing base
E polishing plate, abrasive and
polishing paper
2. Pull off the outer jacket.
Passive network components
System Manual, 02/2013, C79000-G8976-C282-01
Instructions for fitting connectors, attachments and devices
a anti-kink sleeve
b knurled nut
c SC RJ housing
d body of connector
e dust protection
3. Cut off the Kevlar yarn and fleece
wrapping with the Kevlar scissors.
2.4 Optical networks
1. Remove the outer jacket using a
stripping tool.
Set the cutting depth of the stripping
too
l so that the inner cores cannot be
dam
aged.
4. Cut off the cable strain relief
elements (brown) with the side
cutter.
63