Optical Networks; Fitting An Ie Fc Fo Cable With A Bfoc Connector - Siemens 6GK1 901-1GB01 System Manual

Instructions for fitting connectors, attachments and devices

2.4 Optical networks

2.4 Optical networks
2.4.1

Fitting an IE FC FO cable with a BFOC connector

Introduction
The next section explains the individual steps assembling an IE FC FO cable with a BFOC
plug using the FC FO termination kit for BFOC plugs.
You should also refer to the assembly instructions supplied with the FC FO termination kit for
BFOC plugs.
Procedure
FC FO termination kit
A Kevlar scissors

B Stripping pliers

C Cleave tool

D Microscope

E Fiber container

54
BFOC plug
a Anti-kink sleeve

b Forcing nut

c Buffer and Kevlar clamp

d Body of connector

e Dust protection cap

1. Remove the outer jacket using a
suitable stripping tool.
Recommendation: The length of the
stripped piece of cable should not be
less than 200 mm.
Passive network components
System Manual, 02/2013, C79000-G8976-C282-01