Bosch Rexroth IndraControl VAU 01.1 Series Operating Instructions Manual page 56

Bosch Rexroth AG
Index
Order data
Battery....................................... 8
End clamp.................................. 8
RS232 cable.............................. 8
USB connecting cable with
increased noise immunity.......... 8
Ordering information.................... 45
Overall connection scheme.......... 29
P
Power supply unit......................... 22
Power supply unit, external.......... 22
Product identification..................... 4
R
Relative humidity............................ 9
Release lever of the mounting
rail holder..................................... 22
Rotary switch S1........................... 36
Timing...................................... 36
RS232 cable.............................. 8, 28
S
S1................................................. 36
Safety alert symbol......................... 5
Safety instructions.......................... 5
Scope of delivery............................ 5
Signal words................................... 5
Spare parts..................................... 7
Standards..................................... 13
Storage time................................. 44
Storing the UPS............................ 44
Suggestions.................................... 4
Support
See service hotline.................. 47
Symbols.......................................... 6
T
Target groups................................. 1
Technical data................................ 9
Wear parts................................. 8
Terms.............................................. 3
Terms and abbreviations................ 3
Testing the battery....................... 44
Timing behavior............................ 37
Torque.......................................... 23
Type code..................................... 45
Type plate....................................... 4
50/53
U
UL/CSA certified........................... 15
UPS times..................................... 36
UPS-NT control software.............. 37
UPS-NT Control software.............. 33
USB cable................................. 8, 26
USB cable with increased
noise immunity............................... 8
Use, intended................................. 6
Used standards VAU 01.1U
and VAU 01.1S.............................. 13
Used standards VAU 01.1Z........... 13
V
VAU 01.1S and VAU 01.1Z –
connecting the panel PC or
control cabinet PC to XCOM1...... 27
VAU 01.1S and VAU 01.1Z –
serial interface XCOM1................. 18
VAU 01.1U – connecting the
panel PC or control cabinet
PC to XUSB In............................... 26
VAU 01.1U/VAU 01.1S
Degree of protection and
weight........................................ 9
VAU 01.1Z
Degree of protection and
weight...................................... 11
VAU 01.1Z – connecting the
115/230 VAC voltage supply......... 24
W
Wear parts...................................... 7
Wiring........................................... 23
Wiring, electrical........................... 22
DOK-SUPPL*-VAU*01.1X**-IT02-EN-P
VAU 01.1