Bosch Rexroth IndraControl VAU 01.1 Series Operating Instructions Manual page 49

VAU 01.1
1
①
Fastening screws of the battery
Fig. 14-4: Position of the four M3 screws
Dispose the battery immediately and properly. Observe the notes given in
chapter 16 "Disposal" on page
8.
●
Attach the new battery by using the four original M3 screws. A longer
screw might damage the housing of the battery.
Observe that only a battery which is permitted by Bosch Rexroth is in-
●
stalled, e. g. the battery "AKKU24V/2,5Ah" (Bosch Rexroth parts num-
ber: 1070923287)
Tighten the four M3 screws
●
on page 43
DOK-SUPPL*-VAU*01.1X**-IT02-EN-P
46.
NOTICE
with a torque of 6.2 lbf in (0.7 Nm)
Battery damage due to inadequate
screws.
fig. 14-4 "Position of the four M3 screws"
Bosch Rexroth AG
Maintenance
43/53