VAU 01.1
1
①
End clamps on the mounting rail
Fig. 10-2: End clamps
Fixing the cables
Unfixed cables are not permitted. Therefore an appropriate fixing (e. g. installa-
tion in a cable channel) and a strain relief of the cables is required.
10.4 Disassembly
Preparing the dismounting
Shutdown the PC
●
Disconnect the UPS from the voltage supply
●
Remove the cable from the UPS
●
VAU 01.1U/VAU 01.1S – unlocking the UPS
Unlock the UPS from the mounting rail by pulling the release lever to the bot-
●
tom side by using a screwdriver, see
the mounting rail holder" on page
DOK-SUPPL*-VAU*01.1X**-IT02-EN-P
Assembly, Disassembly and Electrical Installation
fig. 10-3 "Position of the release lever of
22.
Bosch Rexroth AG
1
21/53