VAU 01.1
11 Date of manufacture (yyWww)
12 Serial number as barcode
13 Serial number
Fig. 2-1: Type plate, example
2.2 Scope of Delivery
UPS
●
Safety instructions
●
always one connector for X1S1 and X1S2
●
3 Using the Safety Instructions
3.1 Safety Instructions – Structure
The safety instructions are structured as follows:
CAUTION
Do not open the batteries and do not heat them over 80 °C.
Fig. 3-1: Safety instructions – Structure
3.2 Explaining Signal Words and Safety Alert Symbol
The safety instructions in this documentation contain specific signal words (dan-
ger, warning, caution, notice) and, if necessary, a safety alert symbol (according
to ANSI Z535.6-2006).
The signal word is meant to draw the reader's attention to the safety instruction
and signifies the degree of danger.
The safety alert symbol (a triangle with an exclamation point), which precedes
the signal words danger,warning and caution is used to alert the reader to per-
sonal injury hazards.
DANGER
In case of non-compliance with this safety instruction, death or serious injury
will occur.
DOK-SUPPL*-VAU*01.1X**-IT02-EN-P
Safety alert symbol
Signal word
Burns and chemical burns due to wrong
battery treatment!
Avoiding danger
Using the Safety Instructions
14 Test marking
15 Company address
Consequences and
source of danger
Bosch Rexroth AG
5/53