Philips M3150B Installation And Service Manual page 249

Field
Standby Messages
Procedure The procedure for configuring the General Configuration window is as follows.
Step 1. Enter the name of the hospital in the Institution Name field using the keyboard.
Step 2. For a Database Server, make the desired selections in the Database Server
Step 3. For networked Information Centers and Clients, make the desired selections for this
Step 4. For an Information Center, make the desired selections for this device in the
Step 5. Click Next> to save changes and advance to the next page.
Description
Write up to 12 Standby Messages that can be selected in the Patient Window when the
Standby button is clicked. Each message can contain up to 15 characters.
Factory Default messages are:
Cathlab
Hemodialysis
Orthopedics
Pulmonary
X-Ray
Other
Type in the desired Standby Messages in the boxes provided using the keyboard. The
keyboard TAB key can be used to advance to the next message.
Settings fields.
device in the Local General Config Settings fields and type in any desired
Standby Messages in the boxes provided using the keyboard
Database Server Settings fields.
Software Installation & Configuration
Configuration
6-23