Printer Installation - Philips M3150B Installation And Service Manual

Locating System Components
Printer
Installation
Note
(access to print cartridge
and serial/model #)
Paper Level
5-16
Hardware Installation
Install all printers that connect to switches as follows:
When connected to a network, a JetDirect, 10Base-T Ethernet card must be installed in the
LaserJet Printer. This card comes with Option M3159A #A02. A 10 Mbit/s, UTP cable with
an RJ-45 connector is then used for the connection.
Device
M3150 Information Center (local database);
M3170 Patient Link
M3154 Database Server system (connection to M3155
Information Centers)
Large Network M3154 Database System
M3169 Small Database Server System
The Printer is the 2300L model manufactured by Hewlett-Packard and shown in Figure 5-
16. Front panel controls for the 2300L are shown in Figure 5-17. Rear panel cable
connections are shown in
See the LaserJet 2300 Printer User's Manual for procedures for properly unpacking and setting
up the printer.
Top Output Bin
Top cover
Tray 1
(pull down)
Indicator
Tray 2
Control Panel
Figure 5-16 2300L LaserJet Printer
Maximum # of Printers
2
8
80
4