Sony VPL-AW10 Operating Instructions (VPLAW10 and VPLAW15) Operating Instructions Manual page 47

Input-A Signal Sel.
Color System
Lamp Setting
Selects the type of signal input from the equipment connected to
the INPUT A connector.
Selects the type of signal input from the equipment by selecting
"Input-A" with the INPUT.
Auto: Selects the input signal type automatically.
Computer: Inputs the signal from a computer.
Video GBR: Inputs the signal from a TV game or HDTV broadcast.
Component: Inputs the component signal from a DVD player/
recorder, Blu-ray Disc player, digital tuner, etc.
Note
When the input signal is not displayed correctly with this item set to
"Auto," select the item according to the input signal.
Selects the color system of the input signal.
Auto: Selects the color system of the input signal automatically
from among NTSC
3.58
PAL-N, or PAL60.
"NTSC3.58"–"PAL-N": Allows you to set the color system to the
selected system manually.
Note
Normally, set this to "Auto." If the picture is distorted or colorless,
select the appropriate color system for the input signal.
When replacing the lamps, set the desired lamp setting.
(1 page 57)
, PAL, SECAM, NTSC
4.43
, PAL-M,
47