Sony VPL-AW10 Operating Instructions (VPLAW10 and VPLAW15) Operating Instructions Manual page 42

Projectors: bravia home theater lcd projector
Hide thumbs Also See for VPL-AW10 Operating Instructions (VPLAW10 and VPLAW15):
Table of Contents

Advertisement

Sharpness
NR (Noise Reduction)
DDE (Dynamic Detail
Enhancer)
Black Level Adj.
(Adjust)
Gamma Correction
42
Sharpens the outline of the picture, or reduces the noise.
The higher the setting, the sharper the picture. The lower the setting, the
softer the picture, thus reducing the noise.
Reduces the roughness or noise of the picture.
Usually, select "Off".
If the picture is rough or noisy, select a setting from among "Low",
"Middle" or "High" according to the input signal source.
According to the film source you have selected, make a setting for
playback.
Film: Normally, select this option. Reproduces the 2-3 Pull-Down film
sources with smooth picture movement. When the video signal with a
format other than the 2-3 Pull-Down is input, "Progressive" is
automatically selected.
Progressive: Converts an interlace format video signal to a progressive
format.
Off: Plays a video signal in an interlace format without converting.
Produces a bolder, dynamic picture.
Set according to the input signal source.
High: Gives higher emphasis to the black color.
Low: Gives lower emphasis to the black color.
Off: Cancels this feature.
Adjusts the response characteristics of the tone of the picture.
Select a favorite tone from three options.
Gamma1: Makes a scene a little brighter.
Gamma2: Makes a scene brighter.
Gamma3: Makes a scene darker.
Off: Gamma Correction is "Off".

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents