Sony VPL-AW10 Operating Instructions (VPLAW10 and VPLAW15) Operating Instructions Manual page 39

4
Make the setting or adjustment
of an item.
When changing the adjustment
level
To increase the value, press M/,.
To decrease the value, press m/<.
Press to restore the previous
screen.
When changing the setting
Press M/m to change the setting.
Press to restore the previous
screen.
You can restore the previous screen
using < depending on the selected
item.
Items that cannot be adjusted
Adjustable items are limited depending on
the input signals. The items that cannot be
adjusted or set do not appear in the menu.
(1 page 64)
To clear the menu
Press MENU.
To reset the picture that has
been adjusted
Select "Reset" from Picture
When the screen display appears, select
"Yes" using < and press
All of the following settings are reset to its
factory preset value.
"Advanced Iris", "Lamp Control",
"Contrast", "Brightness", "Color",
"Hue", "Color Temp", "Sharpness",
"NR", "DDE", "Black Level Adj." and
"Gamma Correction" on the Picture
menu
To reset the items that have
been adjusted
Select an item in the Menu screen, and
display the pop-up menu, the setting
menu, and the adjustment menu.
Press the RESET on the remote control to
reset only the selected settings to its
factory preset value.
Note
RESET on the remote control is available
only when the adjustment menu or the
setting menu is selected.
menu.
.
39