Canon Booklet Finisher-D1 Service Manual page 347

4) Connect the ARKNET Cable to the terminal of the Finisher, and turn the knob in the
direction of the arrow to secure.
CAUTION:
Be sure the power OFF of the Host Machine and the unpliged power plug before
connecting the ARKNET Cable.
Terminal
ARCNET Cable
5) Install the Wire Saddle on the Rear Cover of the Finisher.
Wire Saddle
7
Installation > Installation Procedure > Connecting Cable
Knob
F-7-65
F-7-66
7 Installation > Installation Procedure > Connecting Cable
6) Bundle the ARKNET Cable with the Wire Saddle.
<If connected to Host Machine>
<If connected to Professional Puncher Integration Unit>
7-25
Wire Saddle
ARCNET Cable
F-7-67
Wire Saddle
ARCNET
Cable
F-7-68
7-25