Canon Booklet Finisher-D1 Service Manual page 291

5
Adjustment > Auxiliary Adjustment > Adjusting Engagement/Disengagement Position of Saddle Disengagement Roller > Procedure
3) Pressing switch SW383 [1] or SW384 [2] determines adjustment level.
By pressing SW383 once, the LED [3] indicates "-1" and the pressure applied to the
disengagement roller [1] is reduced (the disengagement roller is moved in A direction).
In the same way, by pressing SW384 once, the LED [3] indicates "+1" and the pressure
applied to the disengagement roller [1] is increased (the disengagement roller is moved in
B direction).
• Adjustment range: -8 to +8 (0.3mm-change per unit)
SW382
SW381
SW383 SW384 SW385
(-) (+)
[1]
5 Adjustment > Auxiliary Adjustment > Adjusting Engagement/Disengagement Position of Saddle Disengagement Roller > Procedure
[3]
ENTER
[2]
F-5-274
[1]
M102
A B
<Reference>
As the plus adjustment value is specified, the feed performance improves.
4) Press switch SW385 [1] again to complete this adjustment.
SW382
SW381
SW383 SW384 SW385
(-) (+)
5) Execute booklet print from the saddle and check that there is no displacement in staple
position.
F-5-275
ENTER
[1]
F-5-276
5-115
5-115