Description
3.3 Power Module
3.3
Power Module
Important data on the Power Modules is provided in this section. Further information is
contained in the hardware installation manuals listed in Section Manuals for your inverter
(Page 451).
All power data refers to rated values or to power for operation with low overload (LO).
Which Power Module can I use with the Control Unit?
You can operate the CU230P-2 Control Unit with the following Power Modules:
• PM230
• PM330
3.3.1
Power Modules in degree of protection IP20 and with push-through system
Figure 3-1
28
• PM240
• PM240-2
Power Module with degree of protection IP20 examples
• PM250
• PM260
Converter with CU230P-2 Control Units
Operating Instructions, 04/2015, FW V4.7 SP3, A5E34257946B AB