Description
3.6 Tools to commission the converter
3.6
Tools to commission the converter
The following tools are used to commission, troubleshoot and control the inverter, as well as
to back up and transfer the inverter settings.
Operator panels
BOP-2 (Basic Operator Panel) -
for snapping onto the inverter
Two-line display
•
Guided basic commissioning
•
IOP (Intelligent Operator Panel) -
for snapping onto the inverter
Plain text display
•
Menu-based operation and
•
application wizards
PC tools
You can access the inverter
with STARTER or Startdrive
either via a USB connection or
via PROFIBUS/PROFINET.
46
For mobile use of the IOP:
IOP handheld with power supply unit and rechargeable batter-
ies as well as RS232 connection cable
If you are using your own connection cable, carefully note the
maximum permissible length of 5 m.
STARTER
System requirements and download: STARTER
(http://support.automation.siemens.com/WW/view/en/2623320
8)
Help regarding operation: STARTER videos
(http://www.automation.siemens.com/mcms/mc-drives/en/low-
voltage-inverter/sinamics-g120/videos/Pages/videos.aspx)
Startdrive
System requirements and download: Startdrive
(http://support.automation.siemens.com/WW/view/en/6803456
8)
Help regarding operation: Tutorial
(http://support.automation.siemens.com/WW/view/en/7359845
9)
SINAMICS PC Inverter Connection Kit 2
Contains the correct USB cable (3 m) to connect a PC to the
inverter.
Door mounting kit for
IOP/BOP-2
For installation of the
•
BOP-2 or IOP in a
control cabinet door.
Degree of protection
•
with IOP: IP54 or
UL Type 12
Degree of protection
•
with BOP-2: IP55
Converter with CU230P-2 Control Units
Operating Instructions, 04/2015, FW V4.7 SP3, A5E34257946B AB
Article number
BOP-2:
6SL3255-0AA00-4CA1
IOP with European lan-
guages:
6SL3255-0AA00-4JA1
IOP with Chinese:
6SL3255-0AA00-4JC1
Door mounting kit:
6SL3256-0AP00-0JA0
6SL3255-0AA00-4HA0
STARTER on DVD:
6SL3072-0AA00-0AG0
Startdrive on DVD:
6SL3072-4CA02-1XG0
6SL3255-0AA00-2CA0