Installing Power Modules - Siemens SINAMICS G120 Operating Instructions Manual
Low voltage converters, chassis and wall/panel mounted devices with cu230p-2 control units
Hide thumbs
Also See for SINAMICS G120:
- List manual (1256 pages) ,
- Manual (732 pages) ,
- Operating instructions manual (550 pages)
Table of Contents
Advertisement
Installing
4.4 Installing Power Modules
4.4
Installing Power Modules
Installing Power Modules
The following is required to correctly install a Power Module:
● Install the Power Module in a control cabinet.
● Install the Power Modules vertically with the line and motor connections facing
downwards.
● Comply with the installation regulations specified in the following sections:
– Minimum clearances to other components
– Fixing elements
– Tightening torques for fixing elements
Installing Power Modules using push-through technology
We recommend that you use the optional mounting frames when installing the Push-Through
device in a control cabinet. This mounting frame includes the necessary seals and frame to
ensure compliance with degree of protection IP54.
If you do not use the optional mounting frames, then you must ensure that the required
degree of protection is complied with using other appropriate measures.
You must mount the inverter on unpainted metal surfaces in order to comply with EMC
requirements.
56
Converter with CU230P-2 Control Units
Operating Instructions, 04/2015, FW V4.7 SP3, A5E34257946B AB
Advertisement
Table of Contents
