Figure 4-4
EMC-compliant wiring of Power Modules in degree of protection IP55 / UL type 12
The following diagram shows the EMC-compliant installation of Power Modules with degree
of protection IP55 / UL type 12.
Figure 4-5
Note
You must use a shielded cable if you use the control terminals of the Control Unit. Connect
the shield to the gland plate via an EMC screw.
Converter with CU230P-2 Control Units
Operating Instructions, 04/2015, FW V4.7 SP3, A5E34257946B AB
Shield connection - detail
EMC-compliant connection of the Power Module PM230, degree of protection IP55 / UL
Type 12
4.2 Connecting inverters in compliance with EMC
Installing
53