X200-X202 Drive-Cliq Interfaces; Protective Conductor Connection; Busbars - Siemens SINAMICS S120 System Manual

High Frequency Modules
4.3 HF Motor Module
4.3.2.3

X200-X202 DRIVE-CLiQ interfaces

Table 4- 4 X200-X202 DRIVE-CLiQ interfaces
Pin
1
2
3
4
5
6
7
8
A
B
The blanking covers for the DRIVE-CLiQ interfaces are included in the scope of delivery.
Blanking covers (50 x) Article No.: 6SL3066-4CA00-0AA0
4.3.2.4

Protective conductor connection

Table 4- 5 Protective conductor connection for HF Motor Module
4.3.2.5

Busbars

Table 4- 6 Busbars at the HF Motor Module
40
Name
TXP
TXN
RXP
Reserved, do not use
Reserved, do not use
RXN
Reserved, do not use
Reserved, do not use
+ (24 V)
M (0 V)
Terminals
PE connection for attaching the
equipotential bonding bar
Technical data
Threaded hole: M5
Tightening torque: 3 Nm
Technical data
Transmit data +
Transmit data -
Receive data +
Receive data -
Power supply
Electronics ground
Technical data
Threaded hole: M8
Tightening torque: 13 Nm
For ring cable lugs without insulation (Page 173)
System Manual, (SH2), 04/2015, 6SL3097-4AH10-0BP3
High Frequency Drive