Siemens SINAMICS S120 Commissioning Manual page 81

What to do?
2. Add individual drive
3. Configure the drive unit.
Commissioning Manual
Commissioning Manual, (IH1), 01/2011, 6SL3097-4AF00-0BP1
How to do it?
Operator action:
--> Double-click "Add individual drive unit".
Device type: SINAMICS S120 (can be selected)
Device version: 4.3 or higher (can be selected)
Address type: PROFIBUS/USS/PPI (can be selected)
Bus address: 37 (can be selected)
Once you have created the project, you have to configure the drive unit. The following
sections provide some examples.
Commissioning
2.4 Creating a project in STARTER
Comment
Information about the bus
address:
The PROFIBUS address of the
Control Unit must be set for initial
commissioning.
Using the rotary coding switches
on the Control Unit, the address
can be set to a value between 1
and 126 and read via p0918. If
the coding switches are at "0"
(factory setting), the value can be
alternatively set between 1 and
126 using p0918.
79