Panasonic LP-GS Series Serial Communication Command Manual page 30

• When the response permission of the marking end verification (MST) command is not set
Send the next request
command after confirming
the marking completed
with STS response.
30
External device
Marking trigger command: MRKS1
Positive response: ACK00
Status checking command: STSR
Status readout response: STSA02100
(Marking in progress / trigger ready OFF)
Status checking command: STSR
Status readout response: STSA02110
(Non-marking state / trigger ready ON)
Marking trigger command: MRKS1
Positive response: ACK00
ME-LP-GS-SR-COMP-3
Laser marker
Check the laser marker
status when appropriate.