Panasonic LP-GS Series Serial Communication Command Manual page 143

Troubles
When the character size
is small, the marking
characters are not
readable.
Marking is dotted.
Causes
The setting conditions or font are
inadequate for the character size.
• For LP-GS series:
Setting of laser frequency and scan
speed is inadequate.
• For LP-RF/LP-RV series:
Setting of pulse cycle and scan
speed is inadequate.
ME-LP-GS-SR-COMP-3
Measures
• Use "Original 2" or "Original 5" font for the
small size characters.
• Adjust the laser power or scan speed.
Decrease scan speed or increase laser
frequency.
Decrease scan speed or pulse cycle.
143