Table of Contents
Advertisement
No. 2D730-148E*O
3.17
Removing the Front Panel
3.17.1
For the SSA-770A
(1)
(2)
(3)
(4)
(5)
(6)
Removing the left side cover
(a)
Remove the two rubber caps CA> at the bottom of the cover.
(b)
Remove the two M4 screws <A> to remove the cover.
* The cover can be removed by pulling its bottom toward you.
Removing the right side cover
(a)
Remove the two rubber caps cB> at the bottom of the cover.
(b)
Remove the two M4 screws cB> to remove the cover.
* The cover can be removed by pulling its bottom toward you.
Removing the left side cover for the peripheral units
Remove the two M4 screws CC> to remove the cover.
* The cover can be removed by lifting it and pulling it toward you.
Removing the left side cover for the peripheral units
Remove the two M4 screws CD> to remove the cover.
* The cover can be removed by lifting it and pulling it toward you.
Removing the tray
Loosen the four M4 screws <E> to remove the tray.
Removing the top front cover
Remove the four M4 screws cF> to remove the cover.
3-51
Advertisement
Table of Contents
