Table of Contents
Advertisement
No. 2D730-148E*O
11.
SETTING THE PRESET MENU
11 .I
Outline of Each Preset
(1)
Basic preset architecture
This system contains the following presets.
l
System Preset
l
Exam Type (This is actually a system preset.
However, it is important and is therefore
included here also.)
l
Application
Preset
l
Imaging Preset
l
3D Preset
(2)
System preset
System Preset includes a group of parameters to be set in the system.
Some of the
parameters
included in System Preset are available only to the service engineer, but the
parameters are generally available to the user. The user can change the parameters
using
the system preset editor.
(3)
Exam Type (a system preset)
Exam Type is used to set the transducer,
imaging preset, and application preset
automatically.
In this system, the Exam Type can be completely matched with the imaging preset name.
When the Exam Type is selected on the Patient Information screen and the examination
is
started, the selected Exam Type is registered in the DICOM format.
Using the Editor screen, the item (transducer,
imaging preset, or application preset) to be
activated when Exam Type is selected on the Patient Information
screen can be set.
(4)
Application preset
The application preset includes parameters such as Measurement,
Body Mark, Annotation,
and Report that are available to the user. The user can change the settings using the
application
preset editor.
The application preset values at the time of shipment can be returned to those at the time of
shipment at any time even if the values have been changed.
Note, however, that if the
values are returned to those at the time of shipment, the settings specified by the user are
deleted.
In order to prevent this information from being deleted, save it to external storage
media.
1 l-l
Advertisement
Table of Contents
