Peak Integration - GE AKTAavant Getting Started

9 Evaluate and print the results

9.2 Peak integration

9.2 Peak integration
Introduction
Peak integration is used to identify and measure curve characteristics, including peak
areas, retention times and peak widths. This section describes how to perform peak
integration using the UNICORN software. For further information on peak integration,
please refer to UNICORN 6 Evaluation Manual.
Perform peak integration
Follow the instruction below to integrate the curves in a result.
Step
1
2
120
Action
Open the Evaluation module and open a result from the Result Navigator.
Click the Peak Integrate icon.
Result: The Peak Integrate dialog opens.
Getting Started with ÄKTAavant and UNICORN 6 28-9440-69 AB