Lag Llf Status; Lag Port Loop Detect; Lag Port Status; Lan Link - NEC iPASOLINK EX Advanced Instruction Manual

5-34
2.

LAG LLF Status

This condition is not an alarm. The message indicates the settings of Link
Aggregation Group - Link Loss Forwarding.

LAG Port Loop Detect

This condition is not an alarm. The message indicates that the received LACP Frame
has its own MAC Source Address for its Source Address.

LAG Port Status

This condition is not an alarm. The message indicates the Active/Standby status of
LAG member ports.

LAN Link

This condition indicates that the Link-Down is detected from the indicated Ethernet
port. The problem of this condition pertains to the optical fiber cables or to the far-
end NE.
Procedure 5-17
1.
2.
3.
GGS-000548-01E
Retrieve the
Current Status
alarm is not cleared, contact NEC for the further maintenance support.
This step ends the procedure.
Check the connections of optical fiber cables.
 Connect optical fiber cables properly.
 Replace optical fiber cables if required.
Retrieve the
Current Status
Is the alarm cleared?

This step ends the procedure.
YES:

NO: Go to Step 4.
, and check if the
LAG LINK
, and check if the
LAN LINK
iPASOLINK EX Advanced: O
CORRECTIVE MAINTENANCE
alarm is cleared. If the
alarm is cleared.
& M
PERATION AINTENANCE
BB
ETH
ETH
ETH