Eth-Ring Cause; Eth-Ring Multi Rpl Owner Detect; Eth-Ring Port0 Loop Detect; Eth-Ring Port0 R-Aps Timeout - NEC iPASOLINK EX Advanced Instruction Manual

5-30

ETH-Ring Cause

This condition is not an alarm. The message indicates the ETH-Ring State changes.

ETH-Ring Multi RPL Owner Detect

This condition is not an alarm. The message indicates that system detects the multiple
settings of ETH-Ring RPL.

ETH-Ring Port0 Loop Detect

This condition is not an alarm. The message indicates that system detects loops in the
indicated ETH-Ring traffic.

ETH-Ring Port0 R-APS Timeout

This condition is not an alarm. The message indicates that the time out for receiving
R-APS message occurs at the node that configures ETH-Ring where there are no
locked-out ports.

ETH-Ring Port0 Status

This condition is not an alarm. The message indicates the state changes of the port
that configures the ETH-Ring.

ETH-Ring Port1 Loop Detect

This condition is not an alarm. The message indicates that system detects loops in the
indicated ETH-Ring traffic.
GGS-000548-01E
CORRECTIVE MAINTENANCE
iPASOLINK EX Advanced: O
ETH
ETH
ETH
ETH
ETH
ETH
& M
PERATION AINTENANCE