NEC iPASOLINK EX Advanced Instruction Manual page 520

Set ETH Function
Parameter
Ignore Received LLF
Signal
Edge Port Setting
——
OAM Send Port Setting
5. Click the
Figure 8-281 Information Dialog Box
6. The
Figure 8-282 LLF Setting Window
iPASOLINK EX Advanced: S
Table 8-51 LLF Setting (Modify) Parameters (2 of 2)
Value
Enable
Disable
(check box)
OAM Send Port Setting option is added for the operation regarding IEEE802.3ah
(LINK OAM), which is currently not supported by iPASOLINK EX/A. All check boxes
must be unchecked. If checked, LLF function does not operate properly, e.g., LLF
will not shut down an Ethernet Port by detecting a Trunk Port failure.
OK
button to proceed.
LLF Setting
information.
This step ends the procedure.
N S
ET ETWORK AND YSTEM
Description
Ignores a received LLF Signal.
Accepts received LLF Signal.
Tick the check box to set the port as Edge Port.
window updates the information.Verify the displayed
P
ROVISIONING
8-201
GGS-000547-01E