Modify Mep Index - NEC iPASOLINK EX Advanced Instruction Manual

8-70
8.6.2.2
NOTE: Under the following conditions, the MEP Index cannot be modified:
 MEP ID is modified to the value that is currently registered to Peer MEP ID.
 Peer MEP ID is modified to the value that is currently registered to MEP ID.
When the modifications such as ones above are needed, delete the MEP
Index that contains the target ID, then newly register the MEP Index with the
desired values.
Procedure 8-20
1. Launch and log in to
2. In the
3. In the
Figure 8-94 ETH OAM Setting Window — OAM MEP Tab
GGS-000547-01E

Modify MEP Index

WebLCT
MENU
frame on the left, expand
Setting ETH OAM Setting
to select
OAM MEP
tabbed page, click the
modified.
MEP Index
OAM MEP Setting (Modify)
.
Provisioning
ETH OAM Setting
. The
MEP Index
option window appears.
iPASOLINK EX Advanced: S
Set ETH Function
ETH Function
, then expand
window appears.
number of the target to be
N S P
ET ETWORK AND YSTEM ROVISIONING