Timing Chain And Chain Tensioner - Suzuki Ignis Service Manual

6A1-34 ENGINE MECHANICAL (M13 ENGINE)

TIMING CHAIN AND CHAIN TENSIONER

1. Crankshaft timing sprocket
2. Timing chain
: Apply engine oil.
3. Timing chain No.1 guide
: Apply engine oil to sliding surface.
4. Timing chain tensioner
: Apply engine oil to sliding surface.
5. Timing chain tensioner adjuster assembly
6. Chain tensioner adjuster mounting bolt
REMOVAL
1) Disconnect negative cable at battery.
2) Drain engine oil.
3) Remove oil pan referring to "OIL PAN AND OIL PUMP
STRAINER".
4) Remove cylinder head cover referring to "CYLINDER HEAD
COVER".
5) Remove timing chain cover referring to "TIMING CHAIN
COVER".
6) Align both intake and exhaust camshaft timing sprocket
marks (1) with notches (2) of cylinder head respectively by
turning crankshaft.
7) Remove timing chain tensioner adjuster assembly (3).
8) Remove timing chain tensioner (4).
9) Remove timing chain No.1 guide (5).
10) Remove timing chain (6) with crankshaft timing sprocket (7).
CAUTION:
After timing chain is removed, never turn crankshaft and
camshafts independently more than its allowable turning
range described in "INSTALLATION" section.
If turned, interference may occur between piston and
valves and valves themselves, and parts related to piston
and valves may be damaged.
7. Chain tensioner mounting bolt
8. Chain guide mounting bolt
Tightening torque