5-44 BRAKES
REAR BRAKE HOSE/PIPE
REMOVAL
1) Raise and support vehicle properly. Remove tire and wheel.
2) Clean dirt and foreign material from both flexible hose end and pipe end fittings.
3) Remove brake flexible hose or pipe.
INSTALLATION
Reverse brake flexible hose installation procedure, nothing the followings.
• Fill and maintain brake fluid level in reservoir.
• Bleed brake system. Refer to "AIR BLEEDING OF BRAKE SYSTEM".
• Perform brake test and check each installed part for fluid leakage.
• Never reuse protector nut once removed. Be sure to use a new one.
• Install clamps properly referring to figure below and tighten bolts.
• When installing hose, make sure that it has no twist or kink.