Table of Contents
Advertisement
45
EVAC-NL connector board FTI2002-N1 [NL]
Description
45 EVAC-NL connector board FTI2002-N1 [NL]
45.1
256
Building Technologies
Fire Safety
Description
The EVAC-NL connector board FTI2002-N1 is used as an interface to the
EVAC-NL operating unit FTO2007-N1. The EVAC-NL connector board is needed
as a connection module from the RS485 interface of the fire control panel to the
operating add-on FCM2008-N1 or the mimic display (EVAC) FT2003-N1. The
EVAC-NL connector board is installed in the same housing as the EVAC-NL
operating unit.
The EVAC-NL connector board FTI2002-N1 is used in the following applications:
As an interface in a remote operating add-on FCM2008-N1
As an interface in the mimic display driver (EVAC) FT2003-N1 (without
operating unit) for EVAC-NL operation and the external operation and
indication elements.
The EVAC-NL connector board has the following features:
Communication interface via RS485 to FS20 fire control panel
Supply inputs for an external 24 V supply
Monitoring signals for external supply
Connection for external operating and display elements (mimic display)
008837_q_en_--
14.05.2012
Advertisement
Table of Contents
