42 Event printer FTO2001-A1
42.1
42.1.1
42.1.2
Building Technologies
Fire Safety
Pin assignments
Connection on printer side
2
1
Wiring on event printer (view of rear side)
1
Fastening clamps
2
Supply connection
3
Connecting the data cable
Connection on station side
The event printer must be directly connected to the power supply.
Connecting the event printer to the power supply (70 W)
Connector
From printer
2
Positive supply (red)
Negative supply (blue) =>
Pin assignment for power supply (70 W)
Connecting the event printer to the power supply (150 W)
Connector
From printer
2
Positive supply (red)
Negative supply (blue) =>
Pin assignment for power supply (150 W)
Event printer FTO2001-A1
3
1
To
Power supply terminal X2
=>
X2, PIN 4 (Usys +)
X2, PIN 3 (Usys -)
To
Power supply terminal X8
=>
X8, PIN 4, 5, 6, 7 or 8 (+24 V)
X8, PIN 1, 2 or 3 (0 V)
42
Pin assignments
239
008837_q_en_--
14.05.2012