Table of Contents
Advertisement
12.4 Configuration of burst telemetry
12.4.1 Hardware setup
12.4.2 Software setup
12.5 Setup for USB recording
Bosch Motorsport
Measurement channel
Distance
Lap number
Lap fuel
Lap time
The telemetry channels and their assigned channel types are displayed in the overview list.
The IP address of the C 60 must be compatible with the address range of the pit PC, the
BT 60 and the BR 60.
1.
Drop BT 60 from Toolbox into system overview.
2.
3.
Open a measurement sheet.
4.
Drag the channel 'BURST_DEVICE_IP' to the measurement sheet.
5.
6.
Switch to 'Race Mode'.
7.
Enter the desired IP address.
This function requires the installation of Software Upgrades. Look into the datasheet of
your device, to see which upgrades are available for your device.
Software Upgrade USB_DATA enables USB recording. To activate Software Upgrade
USB_DATA, enter the license key as described in the chapter 'Feature activation [} 25]'.
For USB recording, Software Upgrade FULL_LOG_1 should also be enabled.
Wiring harness
Bit
USB_Device_Power
USB_Device_DP
USB_Device_DN
Data Logger C 60
Recording and Telemetry | 12
Function
Running distance of current lap
Lap number of current lap
Fuel consumption of last lap completed
Exact lap time of lap completed
Value
Power (red)
D+ (green)
D- (white)
85 / 108
Advertisement
Table of Contents
