Bosch C60 Manual page 81

12.2.3 Logger settings
12.2.4 Recording statistics
12.2.5 Recording diagnosis
Bosch Motorsport
To add a new group, select 'Add group' in the context menu of the recording. The groups
can be renamed to 'Gearbox', 'Aero', 'Engine', etc.
To display the global C 60 settings, open the 'Logger' window and click on the 'Settings'
tab at the bottom.
a)
b)
c)
d)
e)
a) Choose setting for outing counter mode:
• For testbench (without lap trigger) select 'Testbench'.
• For racetrack (with lap trigger) select 'Racetrack'.
b) Choose wether the logging partition shall be named Engine recording or Chassis recording.
c) Advanced setting: Select your logging configuration file, if provided by your Bosch Support
Engineer.
d) Choose or create the condition to start recording
e) Enter a password hint and a password (optional).
f) Setting for automatic fragmentation. Do not change!
The tab 'Statistics' shows the channels' allocation and their current data rate related to the
transmission frequency of the C 60 and the whole transmission system.
The overview helps to detect bandwidth bottlenecks of channels. Bandwidth bottlenecks
can be solved by changing the 'fast/slow block' setting for each channel.
The data rate of the whole system is often less than the data rate of the C 60 and limits
the overall transmission speed.
The channel 'statectrl_ok' of the C 60 can be used for online monitoring of recording
status.
Bit Value
0 1
1 2
2 4
3 8
Data Logger C 60
Name
RECORD
DATAOK
BLKOK
-
Recording and Telemetry | 12
f)
81 / 108