Table of Contents
Advertisement
9.2.3 CAN channel configuration
9.2.4 Extracting data from CAN bus
Bosch Motorsport
2.
Select 'New CAN Channel' from menu.
3.
Insert name and description of channel.
4.
Click 'OK' when done.
The channel is listed in the Data window and a CAN channel configuration window opens.
Representation: Byte
Some CAN devices need to be addressed by a byte represented CAN channel. The ad-
dress can be assigned in this window and is illustrated by a bargraph.
a) Enter name of the CAN-channel.
b) Enter CAN message ID. Check the box, if extended IDs (29 bit) are used.
c) If replacement values are used, specify time-out period and raw value.
d) Check the box, if a multiplexer (row counter) is used.
e) Enter data position, length and format.
f) The bargraph shows assignment of the bytes.
• Red colored fields show the assignment of the data bytes.
• Orange colored fields show the assignment of the multiplexer bytes.
Representation: Bit
Some CAN devices need to be addressed by a bit represented CAN channel. The address
can be assigned in this window and is illustrated by a matrix table.
Data Logger C 60
CAN Bus | 9
29 / 108
Advertisement
Table of Contents
