Setting Up An Online Measurement - Bosch C60 Manual

11.2 Setting up an online measurement

Tabs to switch between sheets
Bosch Motorsport
2. Select 'Download configuration'.
The configuration download starts.
A Green dot and background indicate a successful download.
C 60 supports online measurement of sensor values and diagnostic variables.
Expand 'Measurement Container' and 'Measurement Folder 1' in the Project Tree and
double-click on 'Sheet1'. 'Sheet 1' is opened in the Main Area.
From the context menu of the project, new measurement pages can be created.
From the context menu of a measurement page, the folder can be renamed and deleted.
It also allows the creation of measurement pages.
From the context menu of a measurement page, the page can be renamed and deleted.
To change between different pages, click on the tabs on the bottom of the Main Project
Area.
To add an element to a measurement sheet, do following steps:
1. Drag a measurement element from the Toolbox and drop it on the measurement
sheet.
1. Click on 'C 60' in the Project Tree to display all measurement channels.
2. Select the desired measurement channel and drop it on the measurement element.
If the C 60 is online, the value is displayed.
The measurement element's appearance can be changed using the Properties Menu.
Data Logger C 60
Online Measurement | 11
71 / 108