Removing The Return Roller - Canon Staple Finisher-AA1 Service Manual

11. Until escape delivery roller[1] is removed from the
slide drive holder[2], pull out the escape delivery
roller[1] for the arrow direction.
CAUTION:
Since the escape delivery roller comes in contact with
the sensor flag[3], be sure to escape the sensor flag[3].
12. Remove the shaft support[2] escaping the slide
drive holder[1]. Pull out the escape delivery roller[3]
for the arrow direction.
• 1 shaft support [2]
[3]
[1]
[2]
[1]
[1]
4. Parts Replacement and Cleaning
[1]
NOTE:
Since the escape delivery roller comes in contact with the
sensor flag[2] and guide[3], be sure to escape the sensor
flag[2] and guide[3].

Removing the Return Roller

■ Preparation
1. Lower the stack tray.
2. Remove the stack tray.
" Removing the Stack Tray" on page 96
3. Remove the grate-shaped lower guide.
" Removing the Grate-Shaped Lower Guide" on page
96
134
[2]
[3]
[1]