Canon Staple Finisher-AA1 Service Manual page 161

4. Contact a sheet of paper with the front alignment plate to check the gaps between the alignment plate and a sheet
of paper at [A] and [B] portion. In the case the gap is large, adjust the right-angle adjustment of alignment plate
again.
Front Alignment Plate
5. Widen the rear alignment palte approx. 10mm.
6. Contact a sheet of paper with the rront alignment plate to check the gaps between the alignment plate and a sheet
of paper at [A] and [B] portion. In the case the gap is large, adjust the right-angle adjustment of alignment plate
again.
Paper
10 mm
[A]
[B]
10 mm
153
5. Adjustment
Paper
[A]
Rear Alignment Plate
[B]