Other Parts; Removing The Return Belt Unit - Canon Inner Finisher-J1 Service Manual

Other Parts

Removing the Return Belt Unit

■ Preparation
1. Remove this machine from the host machine.
"Removing this Machine from the Host Machine" on
page 43
2. Remove the Front Cover
Cover Unit" on page 54
3. Remove the Rear Cover."Removing the Rear Cover"
on page 54
4. Remove the Delivery
Tray" on page 54
5. Remove the Upper Feed Guide
Upper Feed Guide Unit" on page 57
6. Remove the Stapler Unit."Removing the Stapler
Unit" on page 62
■ Procedure
1. Remove the Upper Stay [1].
• 2 Screws [2]
2x
2. Remove the Center Return Belt Guide [1].
• 2 Bosses [2]
Unit."Removing the Front
Tray."Removing the Delivery
Unit."Removing the
[2]
[1]
[2]
3. Rotate the machine [1] as shown below, and remove
the 2 Screws [2] of the Front/Rear Return Belt Guide.
2x
4. Return the machine to its original position.
5. Remove the Rear Return Belt Guide [1].
• 1 Boss [2]
70
4. Disassembly/Assembly
[1]
[2]
[1]
[2]
[2]