Processing Tray Area
Adjusting the Alignment and the Staple Position
Adjusting the Alignment and
the Staple Position
Misalignment of Paper
No
Misalignment of Staple
No
END
No
1
Adjusting Stacker Alignment Position
Adjusting Center Alignment Standard
2
Position
Adjusting the Pa-
Right Angle Adjustment of Alignment
3
per Alignment
Plate
4
Adjusting Delivery of Staple Stack
Adjusting the Return Roller/Swing Unit
5
Height
6
Adjusting the Staple Position
Adjusting the
Adjusting the Stapler Unit Installation
7
Staple Position
Position
Adjusting the Staple-Free Binding Posi-
8
tion
Yes
Front/Rear
1.Adjusting Alignment
direction
Plate Position
4.Adjusting Delivery of
Feed
direction
Staple Stack
Yes
Staple
6.Adjusting the Staple
Position
8.Adjusting the Staple-
Staple-free
binding
Free Binding Position
Items
2.Adjusting Center Alignment
Standard Position
5.Adjusting the Return
Roller/Swing Unit Height
7.Adjusting the Stapler Unit
Installation Position
Use case
When misalignment occurs in front/rear di-
rection.
• When the standard position for the
center alignment is misaligned.
• When misalignment occurs in front/
rear direction.
• When remove or replace the align-
ment plate.
• When the paper alignment position is
displaced.
When the paper displacement occurs on
the 1st to 2nd sheets of buffered paper.
• When misalignment occurs in feed di-
rection.
• When misalignment occurs by failure
of the paper feeding to processing
tray.
When the staple position in front/rear direc-
tion is displaced in the front/rear 1-stapling
mode or 2-stapling mode.
• When the stapler unit is replaced.
• When the staple position in feed direc-
tion is displaced in the front/rear 1-sta-
pling mode or 2-stapling mode.
When the staple-free binding position in the
staple-free binding mode.
187
6. Troubleshooting
3.Right Angle Adjustment
of Alignment Plate
Refer to
"Adjusting Stacker Align-
ment Position" on page
149
"Adjusting Center Align-
ment Standard Position "
on page 150
"Right Angle Adjustment
of Alignment Plate " on
page 151
"Adjusting Delivery of Sta-
ple Stack " on page 154
"Adjusting the Return
Roller/Swing Unit Height "
on page 155
"Adjusting the Staple Po-
sition " on page 158
"Adjusting the Stapler Unit
Installation Position " on
page 159
"Adjusting the Staple-
Free Binding Position " on
page 161